Hi-Touch Imaging Technologies 640DL 用户手册
LED Signal Lights
Hi-Ti 640 DL Photo Printer User Manual
www.hi-ti.com
45
Red Signal Light
Indicate problems and notify users a problem occurs on the printer. Different blinking times indicate different
problems.
problems.
Blinking Times
Reason
Solutions
1
Ribbon door is opened.
Close the top cover of the printer.
2
No ribbon cartridge installed.
Install a ribbon cartridge.
3
Run out the ribbon cartridge.
Replace the old ribbon cassette with a new one.
4
No paper left in the paper
cassette.
cassette.
Place more paper to the paper cassette.
5
Paper jammed.
Remove the paper jammed. If you can’t remove the paper,
turn off the printer and then turn it on about 1 minute later. The
printer will move it out automatically.
Note: The Ribbon Door has to be closed.
turn off the printer and then turn it on about 1 minute later. The
printer will move it out automatically.
Note: The Ribbon Door has to be closed.
6
Paper type mismatching.
Modify the paper type setting by choosing Control Panel >
Printer > HiTi 640DL > Properties > Paper type. Choose
PhotoDésirée as paper type if you are printing using the
PhotoDésirée application.
Printer > HiTi 640DL > Properties > Paper type. Choose
PhotoDésirée as paper type if you are printing using the
PhotoDésirée application.
hiti640.book Page 45 Monday, June 24, 2002 2:46 PM