Sony AR-208S 用户手册

"Printer Status Monitor" is on the "Software CD-ROM" (Disc 1).
This allows the user to check on the computer screen whether 
or not the machine is able to print.
It provides information on error states such as paper misfeeds 
and shows the configuration of the machine (number of trays,  
etc.) by means of illustrations. Available paper sizes and paper 
remaining are also indicated.

"Printer Administration Utility" is on the "Software CD-ROM" 
(Disc 2).
This allows the administrator to check information on supplies 
and error states of the machine and other SHARP printers 
(compatible with the Printer Administration Utility) that are 
connected to the network. Settings can also be changed via the 
utility.

Note the following points before using the Printer Status 
Monitor.

When the first print job is executed after starting up the Printer 
Status Monitor, the machine's IP address is automatically set in 
the Printer Status Monitor.

Install and configure the software as explained in "INSTALLING 
THE PRINTER DRIVER" in the software setup guide for 
network printer. (This is not necessary if the software has 
already been installed and configured.)

●

In order to use the Printer Status Monitor and Printer 
Administration Utility, the machine must be connected 
to a network.

●

To install the Printer Status Monitor, see the network 
expansion kit online manual (for setup).