Zebra Technologies P1043301-005 用户手册
Getting Started
Printing a Configuration Label — External ZebraNet 10/100
Printing a Configuration Label — External ZebraNet 10/100
Print
Server
44
P1043301-005
11/21/13
Printing
a Configuration Label — External ZebraNet
10/100
Print Server
Before you begin, you need to get information from the external ZebraNet 10/100
Print
Server
configuration label.
In order to print the external ZebraNet 10/100
Print Server configuration label, the correct
media size must be loaded in the printer. For specific information on media sizes, see
.
To print an external ZebraNet 10/100
Print Server configuration label, complete
these steps:
1.
Turn on (I)
the printer and let it complete its power-up cycle.
2.
When the POST cycle is complete, press the
Test
button and hold it in for a few seconds
before you release it.
An external ZebraNet 10/100
Print Server configuration label prints. Your configuration
.
Important • Make sure the printer is turned off (O).
Table 8 • Label Width
DPI
Inches
mm
600
1.63
41.28
300
1.63
41.28
211
2.5
63.5
150
5.0
127.00