Zebra Technologies PrintServer 用户手册

58

 

PrintServer II User and Reference Guide

Setting up a ZebraNet Connect IP

5. From the Add Port dialog, select Other, then select the ZebraNet Connect Monitor 

as the type of port to add. 

6. Click OK.

The Add ZebraNet Connect Port screen appears. There is a list of all 

PSII

 devices 

discovered on the network.

• The TCP/IP monitor searches only the local subnet.

• The IPX/SPX monitor retrieves all devices found in the NetWare bindery.

7. If the port you want to add is listed in the Ports Available on Local Subnet window, 

select the port name. If the port you want to use is not listed, you can:

• Select Cancel and repeat step 5 to rediscover the 

PSII

 devices. 

• In 

PSII

 Connect for IPX/SPX, click Search and enter the 

PSII

’s network 

number and hardware address.

• In 

PSII

 Connect, click the Locate Non-local Device button and enter the static 

TCP/IP address used for the 

PSII

.

8. Click Add.

9. To save the configuration, click OK.

Now you can use 

PSII

 Connect. Whenever you print to the Windows printer 

configured with 

PSII

 Connect, your print job will go directly to the 

PSII

 port.

ZebraNet Connect for IPX/SPX is a utility that allows simple, direct, IPX/SPX 
printing from your computer to a printer attached to a ZebraNet 

PSII

. Print jobs printed 

through the ZebraNet Connect utility are sent directly to the 

PSII

 and do not require a 

NetWare server, resulting in a reduction of network traffic.

If you have printing problems while using the 

PSII

 Connect printing port, you can 

check the status of the port or change its settings under the printer Properties window.

• For Windows 95/98, select Port Settings under the Details tab.
• For Windows NT 4.0 or Windows 2000, select Configure Port under the Ports tab.

Note • If 

PSII

 Connect is not listed, verify the software has been properly installed.