Zebra Technologies Z6Mplus 用户手册

10

Z4Mplus/Z6Mplus User Guide

13163L Rev. 3 5/20/2004

Select a Site for the Printer

Consider the following when selecting an appropriate location for your printer.

Select a solid, level surface of sufficient size and strength to accommodate the printer and 
other equipment (such as a computer), if necessary. The choices include a table, countertop, 
desk, or cart.

Because the printer was designed and is fabricated as an industrial-type unit, it functions 
satisfactorily in a location that conforms to specified environmental and electrical conditions, 
including a warehouse or factory floor. For more information on the required conditions, see 

.

 shows the temperature and relative humidity requirements for the printer when it is 

operating.

The printer should have enough space around it for you to be able to open the media door. To 
allow for proper ventilation and cooling, leave open space on all sides of the printer.

If the printer will be located away from the data source, the selected site must provide the 
appropriate connections to that data source. For more information on the types of 
communication interfaces, see 

Thermal Transfer

41° to 104°F (5° to 40°C)

20 to 85% non-condensing

Direct Thermal

32° to 104°F (0° to 40°C)

20 to 85% non-condensing

Caution •  Do not place any padding or cushioning material behind or under the printer 
because this restricts air flow and could cause the printer to overheat.