Zebra Technologies Z6Mplus 用户手册
Printer Operation
Load Roll Media
13163L Rev. 3 5/20/2004
Z4Mplus/Z6Mplus User Guide
37
Adjust Media Alignment for Rewind Option
The instructions below apply only if the printer has a Rewind option. The liner should be
installed flush against the backplate of the rewind spindle to prevent the media/backing from
winding too loosely. See
installed flush against the backplate of the rewind spindle to prevent the media/backing from
winding too loosely. See
Figure 24
.
Do the adjustments in the order given. Do only what is needed to solve the problem.
Figure 24 • Rewind Option Adjustment Dial
To adjust the Media Alignment for Rewind Mode, complete these steps:
1.
Turn the adjustment dial clockwise to move the media toward the mainframe.
2.
Turn the dial counter clockwise to move the media away from the mainframe.
1
Rewind Spindle Backplate
2
Rewind Spindle
3
Adjustment Dial
4
Printhead Assembly
1
2
4
3