Zebra Technologies Z4Mplus 用户手册

30

 

Z4Mplus and Z6Mplus User Guide

System Considerations

Standard interfaces: the RS-232 DB-9 serial data port, and IEEE 1284 compliant 
bi-directional parallel port. 

• Socket Card for PCMCIA cards

• ZebraNet PrintServer II (external)
• PS II Internal PrintServer (factory installed only)

Which enables the printer to be connected to 10Base-T Ethernet networks. 

The standard serial and parallel interfaces ar discussed in this section.

Serial Port  Communicating using a serial data port (see illustration on next page) 
requires choosing the baud rate, number of data bits, stop bits, parity, and handshake 
(default settings are 9600 baud, 8 data bits, 1 stop bit, no parity, and 

XON/XOFF

). 

Parity only applies to data transmitted by the printer since the parity of received data is 
ignored. See 

 to configure the 

Note • For further information on serial and parallel, pin-out, and technical 
information, see Appendices A and B, starting on 

.

Note • For further information on PCMCIA cards, see Appendix C, starting on 

Note • For further information on PrintServer II, see the PrintServer II User and 
Reference Guide (Zebra part number 45537L).