RCA SLIM DEVICE 用户手册

8

Squeezebox Owner’s Guide

SLIM

Tip: WEP keys consist of a string of ten or twenty-six digits or letters 

A through F. WPA passwords are a string of letters, numbers or 

punctuation. 

 

Squeezebox connects to your wireless network. If Squeezebox does 

not connect to your wireless access point, you can press the 

 

arrow to go back and fix your settings.  If you are still having trouble, 

check the Troubleshooting section at the end of this guide. 

7.  Choose whether you want the Squeezebox to obtain an IP address 

automatically using DHCP, or whether you want to assign it a static 

IP address. Most networks will let Squeezebox obtain an address 

automatically. Press the 

 arrow. 

 

If you chose to assign Squeezebox a static IP, enter it using the 

numbers on the remote. Press the 

 arrow to save the address.

Tip: Use leading zeroes to specify numbers with fewer than 3 digits, 

for example, you would enter 00.00.004.28 for 0..4.28. 

 

Enter the subnet mask for the network, the default gateway IP 

address, and the address of your DNS server, pressing the 

 

arrow on the remote to move to each one. 

.  If SlimServer isn’t already running, start it now. 

 

Squeezebox will scan your local network to find the computer that’s 

running SlimServer. If you started SlimServer after configuring 

Squeezebox, you may need to scroll to find it. 

2.  Select the computer you want to use. If you are running SlimServer 

on multiple computers on your local network, you can use the 

 

arrow to scroll to the one you want to use.

3.  Press the 

 arrow on the remote to connect.

Setup is complete.

Tip: If you want to go back to setup later press the 

 arrow on the 

remote down and hold it for five seconds. Squeezebox will return to 

the Set Up Networking menu.