RCA SLIM DEVICE 用户手册

23

Squeezebox Owner’s Guide

SLIM

The following tips and answers to frequently asked questions will help 

resolve problems you may encounter.  You can find answers to additional 

questions on our web site at 

.

Press and hold the 

 arrow for five seconds to bring Squeezebox back to 

the setup menu. 

Plug the power connector into Squeezebox while holding down the 

 

button on the remote until you see the Set Up Networking prompt.

Check all your network connections, and make sure that the DHCP server is 

running. Try a different ethernet cable, even if the hub indicates a good link. 

Make sure you are using the latest firmware for your router or access point. 

You can connect Squeezebox directly to your computer (without a local 

network or hub) using an ethernet crossover cable. You can purchase a 

crossover cable at most retail computer stores. Configure your network 

adaptor and Squeezebox with static IP addresses so that they can find 

each other. Visit 

 and search for crossover for 

additional information.

If your network is using WEP encryption, you’ll need the hexadecimal WEP 

key for your wireless network. Hexadecimal keys are either 0 or 26 digits 

of 0-9 or the letters A to F. Some wireless access points or routers use text 

passwords for WEP. The configuration software for your wireless device can 

show the key in hexadecimal. Airport users can use Airport Admin Utilities. 

Use the Base Station menu to find the Equivalent Network Password and 

use the value displayed.

Try using the following URL: 

. (Be sure to type the 

“

” part, as some versions of Internet Explorer require it when 

accessing a URL by IP address.)