Lenovo 4218 用户手册
Diagnostic Error Code
FRU/Action
000-197-XXX BIOS test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 41
the Setup Utility” on page 41
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
000-198-XXX BIOS test aborted
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 41
the Setup Utility” on page 41
2. Flash the system and retest. See “Flash update
3. Go to “Undetermined problems” on page 75
000-199-XXX BIOS test failed, cause unknown
1. Go to “Undetermined problems” on page 75
2. Flash the system and re-test
3. Replace component under function test
000-250-XXX BIOS APM failure
1. Flash the system. See “Flash update procedures”
2. System board
000-270-XXX BIOS ACPI failure
1. Flash the system. See “Flash update procedures”
2. System board
001-000-XXX System Test Passed
No action
001-00X-XXX System Error
System board
001-01X-XXX System Error
System board
001-024-XXX System Addressing test failure
System board
001-025-XXX System Checksum Value error
1. Flash the system. See “Flash update procedures”
2. System board
001-026-XXX System FLASH data error
1. Flash the system. See “Flash update procedures”
2. System board
001-027-XXX System Configuration/Setup error
1. Run Setup
2. Flash the system. See “Flash update procedures”
3. System board
001-032-XXX System Device Controller failure
System board
001-034-XXX System Device Buffer Allocation failure
1. Reboot the system
2. Flash the system. See “Flash update procedures”
3. Run memory test
4. System board
001-035-XXX System Device Reset condition detected
System board
001-036-XXX System Register error
System board
Chapter 9
.
Symptom-to-FRU Index
55