Brady 200M-e 300 用户手册

26

Bradyprinter 200M-e and 200M-e 300 User’s Guide

NOTE:  If two operating conditions occur simultaneously (for 
example, one that causes a light to be on constantly and one that 
causes the same light to flash), the light flashes.

POWER

Off

The printer is off or power is not applied.

On

The printer is on.

TAKE LABEL

Off

Normal operation.

Flashing

(Peel-off mode only.)  The label is available.  Printing is paused until the 
label is removed.

ERROR

Off

Normal operation — no printer errors.

Flashing

A printer error exists.  Check the display screen for more information.

CHECK 

RIBBON

Off

Normal operation — ribbon (if used) is properly loaded.

On

Printing is paused, the front panel displays a warning message, and the 
PAUSE light is on.
•  If the printer is in direct thermal mode:  Ribbon is loaded.
•  If the printer is in thermal transfer mode:  No ribbon is loaded.

PAPER OUT

Off

Normal operation — media is properly loaded.

On

No media is under the media sensor.  Printing is paused, the display 
shows an error message, and the PAUSE light is on.

PAUSE

Off

Normal operation.

On

The printer has stopped all printing operations.  Either the PAUSE key 
was pressed, a pause command was included in the label format, the 
on-line verifier detected an error, or a printer error was detected.  Refer 
to the display screen for more information.

DATA

Off

Normal operation.  No data being received or processed.

On

Data processing or printing is taking place.  No data is being received.

Flashing

The printer is receiving data from or sending status information to the 
host computer.  Flashing slows when the printer cannot accept more 
data, but returns to normal once data is again being received.