Brady 200M-e 300 用户手册

36

Bradyprinter 200M-e and 200M-e 300 User’s Guide

5HPRYLQJWKH/DEHO%DFNLQJ0DWHULDO

NOTE:  Since the rewind spindle holds the backing from a 
standard-size media roll, we recommend that you perform this 
procedure whenever you change the media.

To remove the backing material from the rewind spindle, follow these 
steps (you don’t need to turn off the printer for this procedure).

1. Unwind approximately 36" (915 mm) of backing from the rewind 

spindle.  Cut it off at the spindle.

2. Pull out the hook.  Slide the backing material off of the rewind spindle 

and discard.

3. Wind the media around the rewind spindle once or twice and reinstall 

the hook.  Continue winding to remove any slack in the media.