Brady 200M-e 300 用户手册

62

Bradyprinter 200M-e and 200M-e 300 User’s Guide

LANGUAGE

Selecting the Display Language:  Press the (+) or (–) key to 
display other choices.
Default:  English
Selections:  English, Spanish, French, German, Italian,

       Norwegian, Portuguese, Swedish, Danish,
       Spanish 2, Dutch, Finnish, Japanese

This parameter allows you to change the language used on the 
front panel display.

You have now completed the entire configuration and calibration sequence.  You may either press the 
NEXT/SAVE key or the SETUP/EXIT key.

DARKNESS

You are now back at the first parameter in the configuration 
sequence.

NOTE:  If you pressed the NEXT/SAVE key but are through
             programming the printer configuration, you may press
             the SETUP/EXIT key and continue with the “SAVE
             SETTINGS” function.

SAVE SETTINGS

Save Settings:  Press the (+) or (–) key to display other choices.
Default:  Permanent
Selections:  Permanent, temporary, cancel, load defaults,

       load last save

This display appears when you attempt to exit the configuration 
mode.
• Permanent:  Permanently saves the changes, even when printer 

power is turned off.

• Temporary:  Saves the changes until changed again or until 

power is turned off.

• Cancel:  Cancels all changes since you entered the 

configuration mode except for darkness and tear-off position    
(if they were changed).

• Load defaults:  Loads factory defaults.
NOTE:  Loading factory defaults requires calibration.
• Load last save:  Loads the values from the last permanent save.

PRINTER READY

Press the NEXT/SAVE key to activate the displayed choice.
You have exited the configuration and calibration sequence and 
are now ready for normal printer operation.