Brady 260M 用户手册
Configuration and Calibration
Option Switches
These switches are located at the
rear of the printer above the Signal
Interface Cable Connection. See
Figure 4.2.
rear of the printer above the Signal
Interface Cable Connection. See
Figure 4.2.
In the tables on the following
page, an “ R” means the switch is
OFF (positioned to the right),
while an “ L” means the switch is
ON (positioned to the left). All
switches are in the OFF position
when the printer is shipped from
the factory.
page, an “ R” means the switch is
OFF (positioned to the right),
while an “ L” means the switch is
ON (positioned to the left). All
switches are in the OFF position
when the printer is shipped from
the factory.
Figure 4.1 Option Switches
Figure 4.2 Location of Option Switches
200M
260M
C
o
n
fi
g
ur
at
io
n
an
d
C
al
ib
ra
ti
o
n
4-1