Brady 3000 用户手册
11
Printer-Applicator-System PAM 3000
Optional Features
Keyboard Adapter
The keyboard adapter allows you to connect your PAM 3000 to a MF-2 compatible PC
keyboard using the serial interface. This will allow you to modify variable data stored on a
memory card.
PC Memory Card
PAM 3000 includes an option for using memory cards in order to permanently store graphics,
fonts, databases or whole label formats.
The data can be downloaded via interface. Alternatively, the printer is able to read cards
which were on using PC card drives of computers, lap-tops, etc.
PCMCIA 2.1 conforming sRAM cards or Flash-EPROM cards are accepted.
The maximum capacity for PAM 3000 is 4 MegaByte.
Using a memory card, the printer can be operated without being connected to a computer
which represents a great advantage regarding the flexibility.
Interface Cable
The delivery program of the PAM 3000 includes a serial and a parallel interface cable for data
transfer as an option. The standard length of each cable is 1.50 m.
Warning Light
By using the warning light it is possible to recognize the state of the printer with one view.
Warning Sensors
The sensors recognize, when the diameter of the label supply roll respectively the transfer
ribbon roll decreases below a preset thresould value.
The messages of the sensors are only intended to inform the operator. They do not influence
the operation of the PAM 3000, i.e. the operation is not interrupted.
The messages will be shown by switching on the yellow lamp of the warning light (option).
The signals also can be sent to a control system by using the peripheral interface.
Air Service Unit
PAM 3000 includes an option for adjusting and filtering the compressed air.
Antistatic Brush
By using the antistatic brush option it is possible to reduce the electrical charge in the print
area.
Label material :
Thermal paper, Velin paper, Thermal transfer paper
Various synthetics including : PE, PP PVC, Polyamid, Polyimid
Liner width :
25 mm until 120 mm
Label height :
3,5 mm until 80 mm
Supply roll diameter :
max. 200 mm
Core diameter :
76 mm