Brady 3000 用户手册

Printer-Applicator-System PAM 3000

11 Printer Info Display

Viewing the Printer Info Display

PAM 3000 offers a convenient option for retrieving and viewing information about the printer

configuration and occurred hardware problems without using setup mode or test print mode.

After switching on, or completing the system test or print jobs, the printer is in ONLINE mode.

Pressing the

key will switch into OFFLINE mode where the display shows the status

information on ten different pages which are accessible by repeatedly pressing the

key.

The printer info display can be exited by pressing the

key (back into ONLINE mode) .

Definition of the Printer Info Display

Printer info

1: RS 232 / RTS/CTS

Fig. 11 a Printer info display 1

On the first page, the selected interface (default setting : RS232) and the handshake or

protocol (default setting : RTS/ CTS) will be shown.

Printer info

2: 9.600

Fig. 11 b Printer info display 2

The second page contains information about the fixed baud rate of the serial interface (default

setting : 9600).

Printer info

3: 2.58 / Aug 15 01

Fig. 11 c Printer info display 3

On the third page, the version and the date of the firmware are shown.

The example as shown in figure 11c represents the firmware version No. 2.58 as at Aug 15,

2001.

Printer info

4: 0000 / 2 / 5 / C

Fig. 11 d Printer info display 4

The fourth page of the info display contains coded information on the configuration of the

printer and the internal test results in the format "xxxx / y / z / C".