Samsung GH68-12949A 产品宣传页

S

Left

S

Right

Be sure to first follow the 

Quick Start Guide on 

the reverse side of this guide 

to complete initial setup 

of your headset.

To turn the headset on, 
Press and hold the Multi-Function button for 

4 seconds until you see 4 blue flashes on the 

indicator light, then release. 

You will hear a tone and see the indicator light 

flashes while the power is on 

(see Meaning of the indicator light of this guide).

To turn the headset off, 
Press and hold the Multi-Function button for 

4 seconds until you see blue and red flashes on the 

indicator light, then release.

You will hear series of 2 tones and see the indicator 

light stops flashing.

Wear the headset on your ear.  

In general, you will get better performance  

when there are no obstructions  

(including parts of your body)  

between the headset  

and the phone. 

If the phone’s voice recognition feature is on, you can 

make a voice activated call.

1 

 Press and hold the Multi-Function button. You will hear 

the voice-activation tone.

2 

 Say the name of the person you wish to call. 

Depending on your phone, this feature may not be 

supported.

Press the Multi-Function button. When you release the 
button, the phone dials the last dialled or received 
number.

Press the Multi-Function button.

When a call comes in, the headset sounds the ring tone and 
flashes the blue indicator twice. Press the Multi-Function 
button.

Press [Volume Up] on the side of the headset to increase 
the volume level and press [Volume Down] to decrease the 
volume level

.

You can replace the original earpiece cover with the 

supplied loop earpiece cover. Depending on what ear 

you are going to wear the headset, simply adjust the 

loop accordingly.

Enhanced features are available for phones that support the 

Hands-Free Profile and enhanced features.

• Reject a call

When you receive a call, press and hold the Multi-Function 

button.

Depending on your phone’s setting or type, you may only 

be able to mute the ringer or this feature may not be 

supported.

• Answer a second call

 

When your phone notifies you of another incoming call while 

you are on a call, press and hold the Multi-Function button to 

answer the second call. 

You can switch between calls by pressing and holding it. 

Depending on your phone, this feature is not supported.

• Place a call on hold 

While you are on a call, press and hold the Multi-Function 

button. To retrieve the call, press and hold the Multi-Function 

button again. Depending on your phone, this feature may not 

be supported.

Flashes in  

blue every  

8 seconds. 

Quick series  

of 2 tones. 

(Active mode 

starts.) 

The headset is in Active mode.
• The headset has an active 

   call in progress.

• You can talk up to 4 hours.*

Flashes in  

blue every 3 

seconds. 

Quick series  

of 2 tones. 

(Standby  

mode starts.) 

The headset is in Standby mode.
• The headset is waiting 

   for a call.

• The headset can be in 

   Standby mode up to 70 

   hours.*

Flashes in 

red.

5 tones every 

20 seconds. 

The battery of the headset is 

low.  

 

• There is less than 10% of 

   battery power left. Recharge 

   the battery. 

 

*

Depending on the phone type and usage, the actual time  

  may vary. 

Make sure the blue indicator light on your 

headset turns on when your phone is 

searching for devices. 

not working. 

Make sure your phone is on and the Bluetooth 

feature is turned on in your phone. 

If the Bluetooth feature has been turnned off 

or was turned on only temporarily, you may 

need to restart the Bluetooth feature. 

If you have confirmed the Bluetooth feature is 

on in your phone, pair your phone and 

headset again.

 

1301 East Lookout Drive Suite 150 

Richardson, TX 75082  

http://www.samsungmobileusa.com/

accessories

1-888-987-4357

 

 

Depending on your phone, how to redial the last number 

may vary.

Do not hold the Multi-Function button down too long when 

making a call with your voice, ending, or answering a call. 

This should only be a quick tap.