Sony STR-DB900 用户手册
Ho
okin
okin
g up
Comp
onen
ts
15
GB
— TEST TONE
Use the remote while seated in your listening
position to adjust the level of each speaker.
position to adjust the level of each speaker.
1
Press
?/1
to turn on the receiver.
2
Press TEST TONE.
“T.TONE” appears in the display and a test
tone is output from each speaker in the
following sequence:
tone is output from each speaker in the
following sequence:
3
Adjust the LEVEL parameters so that
the level of the test tone from each
speaker sounds the same when you
are in your main listening position.
the level of the test tone from each
speaker sounds the same when you
are in your main listening position.
To adjust the balance and level of speakers,
press MAIN MENU repeatedly to select
LEVEL menu, then press
press MAIN MENU repeatedly to select
LEVEL menu, then press
F/f to select the
parameter you want to adjust (page 26).
Next, press
Next, press
G/g to select a setting.
4
Press TEST TONE again to turn off the
test tone.
test tone.
Tip
You can adjust the level of all speakers at the same
time. Press MASTER VOL +/– on the remote or rotate
VOLUME on the receiver.
time. Press MASTER VOL +/– on the remote or rotate
VOLUME on the receiver.
Notes
• The front balance, center level, surround level,
surround back level and subwoofer level are shown
in the display during adjustment.
in the display during adjustment.
• To enjoy better sound quality, do not turn up the
volume of the subwoofer too high.
Adjusting the speaker
levels and balance
levels and balance
r
r
r
r
r
r
r
Center
Front (left)
Front (right)
Surround (right)
Surround (back)
Surround (left)
Subwoofer