Siemens PC 670 用户手册
Configuring the Computing Unit in BIOS Setup
Release 04/02
5-15
Panel PC 670 Computing Unit, Equipment Manual
5.1.2
Menü Advanced
Menu structure
PhoenixBIOS Setup Utility
Item Specific Help
ESC
Exit
Reset Configuration Data:
Select Item
Select Menu
+ / –
Select
Change Values
Sub-Menu
F9
F10
F10
Setup Defaults
Save and Exit
Save and Exit
COM/LPT Configuration
Floppy disk controller:
[Enabled]
[ No ]
Select the operating
system installed
on your system which
you will use most
commonly.
system installed
on your system which
you will use most
commonly.
Note: An incorrect
setting can cause
some operating
systems to display
unexpected behavior.
setting can cause
some operating
systems to display
unexpected behavior.
Enter
Help
F1
Security
Power
Boot Sequence
Version
Exit
Main
Large Disk Access Mode:
[DOS]
Local Bus IDE adapter:
[Both]
Advanced
Memory Gap at 15 Mbyte:
[Disabled]
Video Adapter Settings
Installed O/S:
[ Other ]
PCI Configuration
Setup Warning
Setting items on this menu to incorrect values may
cause your system to malfunction
cause your system to malfunction
Figure 5-9
“Advanced” Menu
Settings of the Advanced menu
Installed O/S
Plug and Play means that all modules are automatically detected and
installed, providing they support the Plug and Play functionality.
installed, providing they support the Plug and Play functionality.
[other]
BIOS handles the entire Plug and Play capability, default
configuration
configuration
[Win98]
The operating system handles some of the
Plug and Play functions
Plug and Play functions
Reset
Configuration
Data
Configuration
Data
[Yes]
means that all previous Plug and Play
are deleted. During the next system booting procedure the
configuration will be started again. The entry is then reset to
[No]. System components that do not support Plug and Play
have to be entered manually.
are deleted. During the next system booting procedure the
configuration will be started again. The entry is then reset to
[No]. System components that do not support Plug and Play
have to be entered manually.
Floppy disk
controller
controller
Enables or disables the floppy-disk controller on the motherboard.
Local Bus IDE
adapter
adapter
[Primary]
One IDE interface for max. two drives.
[Secondary]
[Both]
[Both]
Two IDE interfaces for max. four drives.
[Disabled]
No local IDE interface.