Toshiba L600D 用户手册

Chapter 4 Replacement Procedures

4.13 CPU Heat Sink

Removing the CPU heat sink

The following describes the procedure for removing the CPU heat sink (See Figure 4-13-1).

1. Disconnect the Heat sink cable from the connector on the mother board

2. Remove the following screws securing the heat sink holder along 1 to 3.

 M2.02.5

screw

NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse

order of the number marked on the holder.

Figure 4-13-1 Remove the CPU heat sink

Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)