Toshiba S4 用户手册

To install the slim select bay module, follow the steps below and refer to Figure 4-8 and 4-9.

1.  Install the connector cover holder to the optical drive assembly and secure it with

the following screws.

•  M2×6S

BIND screw

×1

•  M2×22S BIND screw

×1

2.  Install the connector cover to the optical drive assembly and secure it with the

following screw.

•  M2×3S

S-FLAT HEAD screw

×1

3.  Install the connector cover and connector to the optical drive assembly and secure it

with the following screws.

•  M2×6S

BIND screw

×2

4.  Insert the slim select bay module into the computer to connect it to the connector on

the system board. Press to ensure a firm connection.

5.  Remove the following screw from the screw hole. Then secure the latch with the

removed screw. (The slim select bay is locked.)

•  M2.5×4B FLAT HEAD screw

×1