Toshiba A60 用户手册

下载
页码 236
3-10
User's Manual
G
ETTING
 S
TARTED
Standby mode
If you have to interrupt your work, you can turn off the power without exiting from
your software. Data is maintained in the computer’s main memory. When you turn
on the power again, you can continue working right where you left off.
CAUTIONS: 1. When the AC adaptor is connected, the computer will go
into Standby mode according to the settings in the
TOSHIBA Power Saver utility.
2. To restore operation from Standby mode, press the power
button or press any key. The latter action works only if
Wake-up on Keyboard is enabled in HW Setup.
3. If the computer automatically enters Standby mode while
a network  application is active, the application might
not be restored when the computer wakes up from
Standby.
4. To prevent the computer from automatically entering
Standby mode, disable Standby in TOSHIBA Power
Saver. That action, however, will nullify the computer’s
Energy Star compliance.
NOTES: 1. Before entering Standby mode, be sure to save your data.
2. Do not install or remove a memory module while the
computer is in standby mode. The computer or the module
could be damaged.
3. Do not remove the battery pack while the computer is in
standby mode (unless the computer is connected to an AC
power source). Data in memory will be lost.
4. If you carry the computer on board an aircraft or into a
hospital, be sure to shut down the computer in hibernation
mode or in shutdown mode to avoid radio signal
interference.
Benefits of standby
The  standby feature provides the following benefits:
Restores the previous working environment more rapidly than does
hibernation.