Toshiba A1 用户手册
3.17 Sound/LAN/Modem Test
3 Tests and Diagnostics
Subtest 03 Modem Test
For this subtest, connect the modem PCB and RJ11 connector with a harness.
This subtest contains the following tests. Use the dedicated “FAT-MODE
inspection device (product code: QE2000P01 made by Nitto Denki
Seisakusyo)” for the tests.
inspection device (product code: QE2000P01 made by Nitto Denki
Seisakusyo)” for the tests.
Select
4
to execute and press
Enter
. The following message will appear:
ICHx MDC Test Program with Modem Sound ( PCB Interface )
Version X.X
* Scorpio Modem Initialize :OK
* Digital Loopback Test :OK
* Modem Sound Test :( Operator’s Check!! )
After a few seconds, the following message will appear:
...Press Key ( Y = OK , N =NG )
If you hear the modem sou
n
d from the speakers, press
Y
. Otherwise, press
N
.
NOTE: The menu displayed by your computer may be slightly different
from the one shown above.
from the one shown above.
After you press
Y
or
N
, the RJ11 Connection Check (LED) (Operator’s Check
LED) test will be executed, and the following message will appear:
...Press Key ( Y = OK , N =NG )
If the color in the LED of the connection checker is orange, press
Y
.
Otherwise, press
N
.
Satellite A10/TECRA A10/Satellite Pro A10 Maintenance Manual (960-445)
3-41