IBM 150 用户手册

RS/6000 43P 7043 Models 150 and 260 Handbook

  • Display or Change Diagnostic Run Time Options:

The Display or Change Diagnostic Run Time Options task allows the 
diagnostic run time options to be set.

  • Display Previous Diagnostic Results:

Each time the diagnostics produce a service request number (SRN) to 
report a problem, information about that problem is logged. The service 
representative can look at this log to see which SRNs are recorded.

  • Display Resource Attributes:

This task displays the Customized Device Attributes associated with a 
selected resource.

  • Display Service Hints:

This service aid reads and displays the information in the CEREADME file 
from the diagnostics media.

  • Display Software Product Data:

This task invokes SMIT to display information about the installed software.

  • Display System Environmental Sensors:

This service aid displays the environmental sensors implemented on a 
CHRP/RPA system.

  • Display Test Patterns:

This task provides a means of adjusting system display units by providing 
displayable test patterns.

  • Download Microcode:

This service aid provides a way to copy microcode to an adapter or 
device.

  • Flash SK-NET FDDI Firmware:

This task allows the Flash firmware on the SysKonnect SK-NET FDDI 
adapter to be updated.

  • Format Media:

The selection of diskettes, hardfiles, or optical media can be formatted.

  • Generic Microcode Download:

This service aid provides a means of executing a generic script from a 
diskette. The intended purpose for this generic script is to load microcode 
to a supported resource.