IBM 6269 用户手册
A40/A40P Clear CMOS/Flash Boot Block Recovery
Use the recovery jumper setting to Clear CMOS or to Flash Boot Block
Recover.
Use the recovery jumper setting to Clear CMOS or to Flash Boot Block
Recover.
Jumper
Setting
Description
CMOS Reset
2-3
CMOS Reset/Flash Recovery Mode
1-2 (D)
Normal Mode
Note:
The A40/A40P CMOS clear/recovery jumper pins are numbered as
follows:
v Pin 1 is the farthest from the battery.
v Pins 2 and 3 are below pin 1, as seen in the A40/A40P System Board
follows:
v Pin 1 is the farthest from the battery.
v Pins 2 and 3 are below pin 1, as seen in the A40/A40P System Board
layout.
A40/A40P Processor Speed Settings
Processor speed for NetVista type 6058/6059/6578/6579 computers is fixed
and is determined by the processor. There are no settings required.
Processor speed for NetVista type 6058/6059/6578/6579 computers is fixed
and is determined by the processor. There are no settings required.
A40/A40P Diskette Write Access
Diskette Write Enable and Write Protect options are changed in the Setup
Configuration. See “Setup Utility program” on page 122.
Diskette Write Enable and Write Protect options are changed in the Setup
Configuration. See “Setup Utility program” on page 122.
Chapter 3. Types 6058/6059/6269/6578/6579
149