GE GFK-2251 用户手册
GFK-2251
Chapter 5 System Operation
5-7
5
Communications
Your industrial computer has been configured with networking components that enable
you to establish new networks or connect to existing networks easily. If you intend to use
Microsoft NetBEUI, TCP/IP, or Direct Cable Connection, some minimal setup changes are
required before you can use the system for network applications. In Windows operating
systems, these settings are changed using the Network application in the Control Panel
program group.
you to establish new networks or connect to existing networks easily. If you intend to use
Microsoft NetBEUI, TCP/IP, or Direct Cable Connection, some minimal setup changes are
required before you can use the system for network applications. In Windows operating
systems, these settings are changed using the Network application in the Control Panel
program group.
Table 5-3. Installed Network Components
Network Component
Comments
PCI Network Adapter
Automatically configured in system
TCP/IP
Default settings must be changed before connecting to an existing
network. Contact your network administrator for appropriate settings.
network. Contact your network administrator for appropriate settings.
NetBEUI
Default settings must be changed before connecting to an existing
network. Contact your network administrator for appropriate settings.
network. Contact your network administrator for appropriate settings.
System Identification
Computer Name: Each system is uniquely identified by its serial number
and can be renamed before adding it to an existing network
Workgroup: The default workgroup is Workgroup. This should be
renamed before adding it to an existing network.
and can be renamed before adding it to an existing network
Workgroup: The default workgroup is Workgroup. This should be
renamed before adding it to an existing network.
Caution
The IP Address must be changed to a unique address. If it is not
changed, conflicts could occur on your network.
changed, conflicts could occur on your network.