Apple MD094LL/A 用户手册
iMac (27-inch, Mid 2010) Take Apart — Logic Board
208
2010-09-09
3
Remove 8 T10 screws,
(in graphic: S=short,
M=medium, L=long)
(in graphic: S=short,
M=medium, L=long)
•
922-6800, (2) short
• 922-9237, (2)
20mm, medium
•
922-9243, (4)
24mm, long
24mm, long
4
Gently pull board
forward and
disconnect 2 or 3
cables (depending on
the configuration) on
the back side of logic
board.
forward and
disconnect 2 or 3
cables (depending on
the configuration) on
the back side of logic
board.
•
DC power cable (#1)
•
SSD data cable (#2)
•
HD data cable (#3)
Note: On the
SSD-only config, (no
hard drive) the HD
data cable (#3) is
absent and a jumper
will be present at
the hard drive temp
sensor connector
location.
SSD-only config, (no
hard drive) the HD
data cable (#3) is
absent and a jumper
will be present at
the hard drive temp
sensor connector
location.