Acer Veriton 3500G 用户手册
53
Opening your computer
Caution: Before you proceed, make sure that you have turned
off your computer and all peripherals connected to it. Read the
“Preinstallation instructions” on page 51.
off your computer and all peripherals connected to it. Read the
“Preinstallation instructions” on page 51.
You need to open your computer before you can install additional
components. See the following section for instructions.
components. See the following section for instructions.
To remove the computer cover
1
Turn off your computer and unplug all cables.
2
Place your computer on a flat, steady surface. If your computer is
in the vertical position, remove the foot stands and place your
computer in the regular desktop position.
in the vertical position, remove the foot stands and place your
computer in the regular desktop position.
3
Remove the two screws from the rear panel using a screwdriver (a)
and set the screws aside.
and set the screws aside.
Hold the sides of the cover with both hands.
Slide it back about an inch (b) and then gently lift it upward to
detach it (c).
detach it (c).
VT3500series_EN.book Page 53 Tuesday, April 16, 2002 11:24 AM