Perreaux SX60m 用户手册
1
Unpacking and Placement
Unpacking
Procedure
The SX60m is packaged for maximum protection. To open, sit
the box upright and cut the reinforced tape at the top of the box.
The product can now be removed.
the box upright and cut the reinforced tape at the top of the box.
The product can now be removed.
Pull the foam protecting end-caps off either side of the unit and
remove the black material covering.
remove the black material covering.
The SX60m Mono-Aural power amplifier is now unpacked and
ready for further installation.
ready for further installation.
Note: Please retain all packaging material for future transport.
Box
Contents
1 x SX60m Mono-Aural power amplifier
1 x Product manual
3 x Performance analysis charts
1 x Detachable AC power cord
1 x Product manual
3 x Performance analysis charts
1 x Detachable AC power cord
Placing Your
SX60m
The SX60m should generally be placed close to your source
equipment, thus keeping interconnect cabling between the
SX60m and associated components as short as practical. This
will reduce the systems susceptibility to radio frequency
interference and the negative effects associated with long cables.
equipment, thus keeping interconnect cabling between the
SX60m and associated components as short as practical. This
will reduce the systems susceptibility to radio frequency
interference and the negative effects associated with long cables.
Ventilation
Requirements
The SX60m is a convection cooled amplifier. For optimal
performance, the unit MUST receive adequate ventilation.
performance, the unit MUST receive adequate ventilation.
à
Please do not cover the product with a cloth or similar.
à
Please do not mount the SX60m directly onto carpeted
surfaces.
surfaces.
In the event that the SX60m is to be incorporated into custom
cabinetry, please refer to the dimensional information provided in
the Physical Dimensions section of the manual (Chapter 12).
cabinetry, please refer to the dimensional information provided in
the Physical Dimensions section of the manual (Chapter 12).
Note: Please take all necessary steps to ensure that the unit
receives adequate ventilation
6