AEG 1000 用户手册

 
 

32 

i

 

To make wiring easier, first remove the front panel(s)
of the external battery units. 

Unscrew the two centered screws in front panel (1) using a 
suitable cross-slot screwdriver (recommended: Phillips PH1). 
Now reach behind the front panel on the right and the left and 
slide it a few millimeters to the left (2). The lock will be released 
you can take off the entire front panel towards the front (3).  

 

 

Fig. 12

 

:  Removing the front panel of the battery extension;  

 

removing the top and bottom access slot covers 

Each front panel has a top and bottom slot cover. Now remove 
the top slot cover in a front panel. If you are using more than one 
battery unit, remove both slot covers in all the other front panels 
so that you can wire that battery units all the way through.