Panasonic A4P Series 用户手册

90

The motor can be operated by the jog operation.

Homing is performed as follows.

...A current position is shown during an operation.

Press       .

When you keep on pressing       , the motor rotates continuously in a positive direction while pressing it.

When you keep on pressing       , the motor rotates continuously in a negative direction while pressing it.

The rotation speed can be set by 16.Pr40 (jog speed [low]).

When you press        during rotation, the rotation speed changes to a jog speed (low).

When you keep on pressing        +       , the motor rotates continuously in a positive direction while pressing it.

When you keep on pressing        +       , the motor rotates continuously in a negative direction while pressing it.

The rotation speed can be set by 16.Pr41 (jog speed [high]).

When you press        during rotation, the rotation speed changes to a jog speed (high).

* Definition of positive or negative direction of rotation depends on the setting of 16.Pr50 
   (operating direction setting).
* If “Error” is shown, it may be caused by any of the factors below.
   • The servo turns off.
   • Operation by I/O etc.

Error occurred

Keep on pressing       .

A dot (  ) moves to the left.

Press       .

Press       .

Movement completed.

Homing

An error occurs if any
parameter related to
homing is not set.

To move to the next process, press       .