Minuteman UPS SentryII UPS 用户手册

 

   

 

- 

8 

- 

 

 

 
Step 6.  The default web server port address is 80. (NOTE: Novell Netware v 5.1 does have the ability to run a web server, you may 

want to change this port address to avoid a conflict.) 

 

 

 

Starting SentryII Services 

 
NOTE: The hosts file on the Novell server may need to be altered before the SentryII service can run properly.  This can be done by 
entering: LOAD EDIT SYS:ETC\HOSTS  at the console prompt.  The IP address of the server needs to be referenced to the server 
name. 
 
From the Novell server, start SentryII by entering the following commands at the console prompt: (NOTE: replace InstallFolder with 
the folder name entered in step 5) 
 
 LOAD 

AIOCOMX.NLM 

 LOAD 

NETDB.NLM 

 LOAD 

SYS:InstallFolder\SENTRYII.NLM 

 

 

 

SentryII should now be executing on the Novell Netware server. Within a few minutes, you should see 
the following messages on the SentryII display: 
 
Connecting to UPS... 
UPS connected successfully. 
 
SentryII is now running.