Banner DX81 产品宣传页
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
P/N 131596 rev. C
SureCross™ DX81
FlexPower™ Supply Module
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner
products. This warranty is in lieu of any other warranty either expressed or implied.
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner
products. This warranty is in lieu of any other warranty either expressed or implied.
CAUTION . . .
Make no modifications
to this product.
Any modifications to this product not expressly
approved by Banner Engineering could void the
user’s authority to operate the product. Contact the
Factory for more information.
approved by Banner Engineering could void the
user’s authority to operate the product. Contact the
Factory for more information.
All specifications published in this document are subject to change. Banner reserves the right to modify the specifications of products, prior to their
order, without notice. Banner Engineering reserves the right to update or change documentation at any time. For the most recent version of any
documentation, please refer to our website: www.bannerengineering.com. © 2007 Banner Engineering Corp. All rights reserved.
order, without notice. Banner Engineering reserves the right to update or change documentation at any time. For the most recent version of any
documentation, please refer to our website: www.bannerengineering.com. © 2007 Banner Engineering Corp. All rights reserved.
Always use lightning arrestors/surge protection with all remote antenna systems to avoid
invalidating the Banner Engineering Corp. warranty. No surge protector can absorb all lightning
strikes. Do not touch the DX80 or any equipment connected to the DX80 during a thunderstorm.
invalidating the Banner Engineering Corp. warranty. No surge protector can absorb all lightning
strikes. Do not touch the DX80 or any equipment connected to the DX80 during a thunderstorm.
The manufacturer does not take
responsibility for the violation of any
warning listed in this document.
responsibility for the violation of any
warning listed in this document.
Specifications
5-pin M12 Quick Disconnect Pinout
3
Blue
dc common (GND)
5
Gray
3.6 - 5.5V dc
Do not apply more than 5.5V dc to the gray wire.
Hookup Diagram
General
Mounting
#10 or M5 (M5 hardware included)
M5 fasteners – Max. Tightening Torque
0.56 N•m (5 in•lbf)
Case Material
Polycarbonate
Weight
0.26 kg (0.57 lb.)
External Cable Glands
One 1/2 NPT type
Cable Glands, Max Tightening Torque
0.56 N•m (5 in•lbf)
Connections
PVC cable; 5-pin Euro-style 150mm Pigtail QD
Only FlexPower™ DX80 devices may be
powered from this supply.
Environmental
Environmental Rating*
IEC IP67; NEMA 6
Operating Temperature**
-40 to +85° C (Electronics); -20 to +80° C (LCD)
Operating Humidity
95% max. relative (non-condensing)
Radiated Immunity
10 V/m, 80-2700 MHz (EN61000-6-2)
Shock and Vibration
IEC 68-2-6 and IEC 68-2-7
Shock: 30g, 11 millisecond half sine wave, 18 shocks
Vibration: 0.5 mm p-p, 10-60 Hz
Shock: 30g, 11 millisecond half sine wave, 18 shocks
Vibration: 0.5 mm p-p, 10-60 Hz
* Please refer to the SureCross™ DX80 Wireless I/O Network product manual, Banner p/n 132607, for installation and waterproofing instructions.
** Operating the devices at the maximum operating conditions for extended periods can shorten the life of the device.