Planar PR5030 用户手册
DLP
®
Projector – User’s Manual
Starting and Shutting down the Projector
1.
Slide the lens cover.
2.
Connect the power cord to the projector
[A] Connect the other end to a wall outlet.
Switch [B] from off (O) to on (
[A] Connect the other end to a wall outlet.
Switch [B] from off (O) to on (
—
)
3.
The POWER and READY LEDs on the
projector turn on.
Turn on the connected devices.
projector turn on.
Turn on the connected devices.
4.
Ensure the Ready LED is on a steady
(not flashing) orange and then press the
Power button to turn on the projector.
The projector splash screen displays and
connected devices are detected.
If the connected device is a PC, press the
appropriate keys on the computer key-
board to switch the display output to the
projector. (Check the user manual of the
PC to determine the appropriate Fn key
combination to change display output.)
See “Setting an Access Password (Secu-
rity Lock)” on page 15 if Security Lock is
enabled.
(not flashing) orange and then press the
Power button to turn on the projector.
The projector splash screen displays and
connected devices are detected.
If the connected device is a PC, press the
appropriate keys on the computer key-
board to switch the display output to the
projector. (Check the user manual of the
PC to determine the appropriate Fn key
combination to change display output.)
See “Setting an Access Password (Secu-
rity Lock)” on page 15 if Security Lock is
enabled.
5.
If more than one input device is con-
nected, press the Source button to
switch among devices
(DVD and HDTV are supported through
the VGA connector).
nected, press the Source button to
switch among devices
(DVD and HDTV are supported through
the VGA connector).
Source Description
RGB: Analog
RGB
Component: DVD input YCbCr
/ YPbPr , or HDTV input YPbPr
via HD15 connector
/ YPbPr , or HDTV input YPbPr
via HD15 connector
Composite
Video:
Traditional composite video
S-Video: Super video (Y/C separated)
DVI: Analog RGB , DVI
– 13 –