Panasonic PT-F200NTEA/PT-FW100NTEA 用户手册

You can make the setting for infrastructure mode

※

(connection through the access point

※

); however, confirm to your system

administrator on network settings before changing any settings.
※“Glossary” (See pages 44 - 45)

ヂ Projector settings

Turn on the projector and press the [NETWORK] button on the remote control.

Select [USER 1]- [USER 3] from [WIRELESS LAN] at the network menu and press
the [ENTER] button.

Set the details of network and select [OK].

As for network setting items, see pages 29 - 31.
Confirm to your system administrator on network settings before changing any settings.

ッ Computer settings

Turn on the computer.

Make the network setting according to your system administrator.

Connect to your access point.

If the projector is not displayed, click [Designate] followed by [ADD], then enter the IP address set in the projector using
the <Access Port Registration> window, and click [REGISTER]. (See page 18)

Start Wireless Manager ME 4.5, click [Wireless LAN] on the <Network Adapter
Selection> window and select the network adapter connected to the access port.

A confirmation message appears asking whether to switch the projector to the network or not. Select [No].

Select the desired projector on the <Select Access Port> window and click [OK].

[

] appears in the menu bar and a connection is established with the projector.

(“Menu description”

ĺSee page 21)

Connecting with wireless LAN

(cont.)

The projector’s MAC address

※

can be checked with [STATUS] in the network menu of the projector unit.

(“Verifying settings”

ĺ see page 34) ※“Glossary” (See page 44)

Connecting through the access point

When the user does not have the [Admin (administrator)] authority, the [Admin (administrator)]’s name and password are
required to make network settings.

If you are unable to connect to the wireless LAN through the access point even after performing the steps in “

ヂ Projector

settings,” contact the manufacturer of the access point.