Optoma Technology EP757 用户手册
For Crestron please set the com port Stop Bits to 2:
Bit Rate: 9600 bits per second
Bit Rate: 9600 bits per second
Data bits: 8
Parity: None
Parity: None
Stop Bits: 2
Flow control: None
Flow control: None
Crestron Users
If using with a Crestron module The power on command OKOKOKOKOK must have a delay of
0.001 sec between each character so:
0.001 sec between each character so:
O[0.001sec]K[0.001sec]O[0.001sec]K[0.001sec]O[0.001sec]K[0.001sec]O[0.001sec]K[0.001s
ec]O[0.001sec]K[0.001sec]
ec]O[0.001sec]K[0.001sec]
So in Crestron language the power on command is:
OKOKOKOKOK\x0D\x20
With a 1 Tick delay between each character
With a 1 Tick delay between each character