Philips PXG10 用户手册

1. Connect the yellow RCA connector (K) to the corresponding

yellow Video Input terminal on the projector and the Video
output terminal on the video source.

2. To use the built-in audio system, connect the red and white

RCA connectors to the corresponding red and white Audio
Input terminals on the projector 

(L) and the Audio output

terminals on the video source.

In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector:
1. Connect the Scart/RCA Audio Video adapter supplied (4) to

the Scart connector of the VCR, Laser Disc player, video
camera or TV.

2. Plug the video/audio connection cable (2) supplied into both

the adapter and the Video in 

(K) and Audio in(L/R) sockets

(L) of the projector.

In case your Audiovisual equipment is equipped with a S-
Video connector:
The S-Video Input terminal uses a video signal system in which
the picture is separated into a color and a luminance signal to
realize a higher-quality image.

1. Plug the S-Video connection cable supplied (5) into the

Audiovisual equipment and the S-Video in socket 

(I) of the

projector.

2. Plug an audio connection cable (optional) or the video/audio

connection cable 

(2) supplied into both the Audio in L/R

sockets 

(L) of the projector and the Audio out L/R sockets of

the Audiovisual equipment.
Insert the white plug into the L socket and the red plug into
the R socket.

If your video equipment does not have an S-video output
terminal, use the Composite video output terminal.

1. To use the 5 BNC connector, slide the 15 pin/BNC switch (M)

on the rear terminals to the BNC position. Connect each
BNC connector to the corresponding BNC Input 1 terminals
(E) on the projector. (BNC-RCA adapters 

(6) are included for

use with RCA type cables and sources.)

2. Connect the other end of the cable (2) to the corresponding

terminals of a DVD player or DTV decoder.

3. To use the built-in audio system, connect one end of the

computer audio cable 

(optional) to Audio Input 1 terminal

(B) on the projector. Connect the other end to the Audio
output terminal on the video source.

When connecting the projector to a DVD player or a DTV 
decoder equipped with Component video outputs, select 
“Component” for “Signal Type” in the GUI “Options”
menu (see page 23).

After the use of “Component”, when connecting to a computer
again, select “Computer/RGB” for “Signal Type” in the GUI
menu (see page 23).

Data 1 in (15pin)

15pin

BNC

R (Pr)

L   R

APPARATEN SKALL
ANSLUTAS TILL
JODAT UTTAG.

B (Pb)

VD

G/G sync (Y)

HD (C sync)

Data 1 in (BNC)

Data 2 in

Audio 1

Audio 2

Data 1 in (15pin)

15pin

BNC

R (Pr)

L   R

APPARATEN SKALL
ANSLUTAS TILL
JODAT UTTAG.

B (Pb)

VD

G/G sync (Y)

HD (C sync)

Data 1 in (BNC)

Data 2 in

Audio 1

Audio 2

S-Video in

RS-232C

110-120V / 220-240V~

Audio in

Video in

Audio out

Data out

Computer - RGB / Component inputs

S-Video in

RS-232C

110-120V / 220-240V~

Audio in

Video in

Audio out

Data out

Computer - RGB / Component inputs

Data 1 in (15pin)

15pin

BNC

R (Pr)

L   R

APPARATEN SKALL
ANSLUTAS TILL
JODAT UTTAG.

B (Pb)

VD

G/G sync (Y)

HD (C sync)

Data 1 in (BNC)

Data 2 in

Audio 1

Audio 2

Data 1 in (15pin)

15pin

BNC

R (Pr)

L   R

APPARATEN SKALL
ANSLUTAS TILL
JODAT UTTAG.

B (Pb)

VD

G/G sync (Y)

HD (C sync)

Data 1 in (BNC)

Data 2 in

Audio 1

Audio 2

S-Video in

RS-232C

110-120V / 220-240V~

Audio in

Video in

Audio out

Data out

Computer - RGB / Component inputs

S-Video in

RS-232C

110-120V / 220-240V~

Audio in

Video in

Audio out

Data out

Computer - RGB / Component inputs

12

General
– The figures in brackets 

(1) correspond to the figures in the diagram on page 10.

The characters in brackets 

(A) correspond to characters in fig. 3 on page 4.

–

Caution: Always turn off the projector while connecting to video equipment, in order to protect both the projector and the

equipment being connected.