Optoma Technology EH505 用户手册

English

94

Config-URL

Device’s IP address
LAN IP address is shown up if 

LAN IP address is valid.
Wireless LAN IP address is 

shown up if Wireless LAN IP 

address is valid.

http://xxx.xxx.xxx.

xxx/index.html

Revision

The revision must follow a 

major.minor.micro scheme. The 

revision is only increased if the 

command protocol is modified.

1.0.0

v

 For wide screen resolution (WXGA), the compatibility support is 

dependent on Notebook/PC models.

v

 This AMX function is only to support AMX Device Discovery.

v

 The broadcast information only send out through valid interface.

v

 Both LAN and Wireless LAN interfaces could be supported at 

the same time.

v

 If “Beacon Validator” was used. Please take care below  

information.

PJLink™ supported commands

The table below shows commands to control the projector using the 

PJLink™ protocol.

Command Description Remark (Parameter)

POWR

Power control

0 = Standby
1 = Power on

POWR?

Inquiry about the 

power state

0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up

INPT

INPT Input switching 11 = VGA1