Panasonic PTAE7000U 用户手册

40 - ENGLISH



 

 

After selecting an item, adjust the image with the 

 

z

▲ ▼  

buttons.

Remote control

Projector controls

You can use these preset parameter settings to 

optimize image projection according to image source 

or projection environment.

The settings change as follows each time the button 

is pressed.

For a general image such as sports 

program.

[DYNAMIC] For viewing at high brightness and 

sharpness.

For HDTV standard (ITU-R BT. 

709) color temperature 6 500 K at 

the default setting of the [PICTURE] 

menu items.

For D-CINEMA standard (SMPTE 

RP431-2) color temperature  

6 300 K at the default setting of the 

[PICTURE] menu items.

Tuned by top Hollywood colorists  

for watching a movie with smooth 

image quality.

For viewing action films and anime 

etc. with vivid color and sharp 

quality.

For use with games.

It may take a few seconds for the picture to stabilize after 

 

z

a picture mode change.

You can adjust the contrast of the colors.

Setting range: -64 to +64

 

z

Adjust the [BRIGHTNESS] in advance if necessary.

 

z

You can adjust the dark (black) part of the projected

image.

Setting range: −32 to +32

 

z

You can adjust the color saturation of the projected

image.

Setting range: −32 to +32

 

z

When COMPUTER signal is input, only movie based 

 

z

signals can be adjusted.

Movie based signals are 480i, 576i, 480p, 576p, 720/60p, 

 

z

720/50p, 1 080/60i, 1 080/50i, 1 080/60p, 1 080/50p and 

1 080/24p.

You can adjust the skin tone in the projected image.

Setting range: −32 to +32

 

z

When COMPUTER signal is input, only movie based 

 

z

signals can be adjusted.

Movie based signals are 480i, 576i, 480p, 576p, 720/60p, 

 

z

720/50p, 1 080/60i, 1 080/50i, 1 080/60p, 1 080/50p and 

1 080/24p.