NEC M402W 用户手册
126
6. Installation and Connections
HDMI 2 IN
HDMI 1 IN
Connecting HDMI Input
You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the
HDMI IN connector of your projector.
NOTE: The HDMI IN connector supports Plug & Play (DDC2B).
HDMI IN connector of your projector.
NOTE: The HDMI IN connector supports Plug & Play (DDC2B).
Audio cable (not supplied)
HDMI cable (not supplied)
Use High Speed HDMI
Use High Speed HDMI
®
Cable.
Input connector
SOURCE button on the projector
cabinet
Button on the remote control
HDMI 1 IN
HDMI1
HDMI1
HDMI 2 IN
HDMI2
HDMI2
TIP: For users of audio video equipment with an HDMI connector:
Select “Enhanced” rather than “Normal” if HDMI output is switchable between “Enhanced” and “Normal”.
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
Select “Enhanced” rather than “Normal” if HDMI output is switchable between “Enhanced” and “Normal”.
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
• When connecting the HDMI IN connector of the projector to the DVD player, the projector’s video level can be
made settings in accordance with the DVD player’s video level. In the menu select [HDMI SETTINGS]
→ [VIDEO
LEVEL] and make necessary settings.
• If the HDMI input sound cannot be heard, in the menu select [HDMI SETTINGS]
→ [AUDIO SELECT] → [HDMI1]
or [HDMI2].
Audio Equipment