Mitsubishi XD530E 产品宣传页

-1-

You can project an image wirelessly from the computer without 
using an RGB cable.

1)

Mount the antenna.

2)

Log on to the computer as a user with administrator 
rights, and then check if the wireless connection is 
available. (For more details, see the manual of your 
computer.)

3)

Turn the projector ON and press the COMPUTER key on 
the control panel or the WIRELESS key on the remote 
control to display the default screen of the wireless 
connection.

1)

Click the Start button of your computer, select My 
Computer, and then select "Control Panel".

2)

Click "Network Connections".

3)

If the wireless connection icon is disabled, right-click 
"Wireless Network Connection" to select "Enable".

4)

Right-click "Wireless Network Connection" to select 
"View Available Wireless Networks". 

5)

Select "Wireless Projector", then click the [Connect] 
button.

(If your computer and the projector are already 
connected wirelessly, close the window.)

1)

Run the Web browser (such as Internet Explorer).

2)

Click the [Download] button.

3)

Select 

the desktop or a folder where you want to save 

the software, and then click the [Save] button.

(You can install the software directly without saving it. If it 
takes a long time to download the software, cancel the 
download once, and then restart the Web browser.)

4)

Double-click the file "Wireless Projector.exe" saved in 
Step 3.

(If your computer and the projector are already 
connected using the software, the installation stops. In 
this case, close the software.)

1)

Double-click the "Wireless Projector" icon on the 
desktop.

Ԙ

ԙ

If the above Web screen is not displayed, enter the 
Server IP address on the lower left of the default 
screen as follows in the address field.

        Example) http://192.168.100.10

EN

XD530U_ENG_Wireless_QS.fm  Page 1  Friday, May 16, 2008  5:29 PM