Galil DMC-1400 用户手册
130 ● LM
DMC-1400 Series Command Reference
LM
FUNCTION: Linear Interpolation Mode
DESCRIPTION:
The LM command specifies the linear interpolation mode and specifies the axes for linear
interpolation. Only the DMC-1425 supports the linear interpolation mode. LI commands
are used to specify the travel distances for linear interpolation. The LE command
specifies the end of the linear interpolation sequence. Several LI commands may be
given as long as the controller sequence buffer has room for additional segments. Once
the LM command has been given, it does not need to be given again unless the VM
command has been used.
are used to specify the travel distances for linear interpolation. The LE command
specifies the end of the linear interpolation sequence. Several LI commands may be
given as long as the controller sequence buffer has room for additional segments. Once
the LM command has been given, it does not need to be given again unless the VM
command has been used.
It should be noted that the controller computes the vector speed based on the axes specified in
the LM mode. For example, LM XY designates linear interpolation for the X and Y
axes. The speed of these axes will be computed from VS
2
=XS
2
+YS
2
, where XS and YS
are the speed of the X and Y axes. The controller always uses the axis specifications
from LM, not LI, to compute the speed.
from LM, not LI, to compute the speed.
ARGUMENTS: LMxx
where
x is always X and Y for the DMC-1425
x = ?
Returns the number of spaces available in the sequence buffer for
additional LI commands.
USAGE:
While Moving
Yes
Default Value
-
In a Program
Yes
Default Format
-
Command Line
Yes
Controller Usage
ALL
OPERAND USAGE:
_LMx contains the number of spaces available in the sequence buffer for the coordinate
system.
RELATED COMMANDS:
Linear end
Linear Distance
Vector acceleration
Vector Speed
Vector deceleration
_CS - Sequence counter
EXAMPLES:
LM XY
Specify linear interpolation mode
VS 10000; VA 100000;VD 1000000
Specify vector speed, acceleration and deceleration
LI 100,200
Specify linear distance
LI 200,300
Specify linear distance
LE; BGS
Last vector, then begin motion