Tripp Lite B007-008 用户手册
3
Introduction
This KVM Switch allows access to multiple PCs from a single console (keyboard, mouse, and
monitor). Control up to 8 PCs or cascade to control up to 512 PC’s from a single
keyboard/monitor/mouse console.
monitor). Control up to 8 PCs or cascade to control up to 512 PC’s from a single
keyboard/monitor/mouse console.
This 8-Port KVM Switch provides three convenient methods to access any PC connected to the system:
1. Using the port selection switches located on the front panel of the unit
2. Entering Hot Key combinations from the keyboard
3. Using the menu driven OSD (On Screen Display) feature.
A powerful Quick View Scan Mode feature allows you to auto scan and monitor the activities of all
operating PCs on the installation one by one.
operating PCs on the installation one by one.
Features:
• Cascade KVMs to Control Up to 512 PCs from a Single Console
• No Software Required - PC Selection done via Front Panel Switches, Hot Keys, or OSD
(On Screen Display)
• Quick View Scan Mode for Monitoring Selected PCs
• PS/2 and Serial Mouse Emulation Provided for System Bootup
• Console’s PS/2 Mouse Controls All Connected PCs - Even Those with Serial Mice
• Microsoft Intellimouse Pro, Logitech FirstMouse, FirstMouse+, Support*
• SVGA, VGA and Multisync Monitor Support
• LED Display for Easy Status Monitoring
• Rack Mountable in 19” System Rack
• Hot Pluggable - Add or Remove PCs for Maintenance Without Powering Down the Switch
• Superior Video Quality: 1920x1440; DDC2B.
* 1. PS/2 compatible mouse support is for three button (wheel) mice.
2. The Change Device procedure in the Logitech Mouse Ware program does not work in Microsoft NT.
Hardware Requirements:
Console
• A VGA, SVGA, or
Multisync monitor capable
of the highest resolution
that you will be using on
any of the PCs.
of the highest resolution
that you will be using on
any of the PCs.
• A PS/2 Style Mouse
• A PS/2 Style Keyboard
PC
Each PC must have:
• A VGA, SVGA or
Multisync card.
• Either a 6-pin mini-DIN
(PS/2 style) or DB-9
(standard serial) mouse port.
(standard serial) mouse port.
• Either a 6-pin mini-DIN
(PS/2 Style) keyboard port
with +5V DC on pin 4 and
Ground on pin 3, or a 5-pin
DIN (AT Style) keyboard
port with +5V DC on pin 5
and ground on pin 4.
with +5V DC on pin 4 and
Ground on pin 3, or a 5-pin
DIN (AT Style) keyboard
port with +5V DC on pin 5
and ground on pin 4.
Cables
The following are the cables
to connect your KVM Switch
to the CPUs or to Cascade
KVM Switches:
to connect your KVM Switch
to the CPUs or to Cascade
KVM Switches:
P753-006 PS/2 Cable Kit–6’
P753-010 PS/2 Cable Kit–10’
P753-015 PS/2 Cable Kit–15’
Note: The wiring and pin assignments will not let you to use a Serial-to-PS/2 adapter at the KVM side of the cable.
Attempting to use a standard serial extender cable with adapters at both ends will fail.
Attempting to use a standard serial extender cable with adapters at both ends will fail.
200603163 93-2538 B007-008 manual.qxd 4/19/2006 1:45 PM Page 3