TP-LINK TL-SG1024D 用户手册
3
Chapter 2 Identifying External Components
This Chapter describes the front panel, rear panel and LED indicators of the Switch.
TL-SG1008/TL-SG1016D/TL-SG1024D just differ in the number of LED indicators
and ports and all figures in this guide are of TL-SG1008.
and ports and all figures in this guide are of TL-SG1008.
2.1 Front Panel
The front panel of TL-SG1008 consists of switch model, switch LED indicators, and
8 10/100/1000Mbps RJ-45 ports.
8 10/100/1000Mbps RJ-45 ports.
Figure 2-1 TL-SG1008 Switch Front Panel sketch
The LED indicators include Power, Link/Act LED indicators, which are used for
monitoring and pre-troubleshooting of the Switch. The following section shows the
LED indicators of the Switch along with an explanation of each indicator.
monitoring and pre-troubleshooting of the Switch. The following section shows the
LED indicators of the Switch along with an explanation of each indicator.
¾
POWER LED: This indicator will light solid red when the Switch powers up. If
the LED is not lit, please check the power supply and connection.
the LED is not lit, please check the power supply and connection.
¾
Link/Act LED: The LED indicates Link/Active status. The corresponding LED
indicator will light solid green when connected to a network device. It flashes
green when data is being transmitted or received on the working connection.
indicator will light solid green when connected to a network device. It flashes
green when data is being transmitted or received on the working connection.
¾
1000Mbps LED: The corresponding port LED indicator will light solid green
when it's working on 1000Mbps speed. Not lit indicates working on
10/100Mbps speed.
when it's working on 1000Mbps speed. Not lit indicates working on
10/100Mbps speed.
2.2 Rear Panel
The rear panel of TL-SG1008 features a power socket and a Grounding Terminal
(marked with
(marked with
).
Figure 2-2 TL-SG1008 Switch Rear Panel sketch
¾
Grounding Terminal: TL-SG1008 already comes with Lightning Protection
Mechanism. You can also ground the Switch through the PE (Protecting Earth)