Cabletron Systems CSX1000 用户手册
USER’S GUIDE
544 CyberSWITCH
ipx trigreq [device]
Generates a triggered RIP/SAP update request to the specified device. You may use this
command to initiate an update request to synchronize with the routing database of a particular
WAN device.
command to initiate an update request to synchronize with the routing database of a particular
WAN device.
ipx trigrip stats
Displays the triggered RIP statistics. Refer to
.
ipx trigsap stats
Displays the triggered SAP statistics. Refer to
ISDN U
SAGE
C
OMMANDS
The following commands are used to display and clear ISDN B-channel monitoring information.
isdn usage
Displays the following ISDN B-channel monitoring information:
•
•
The number of ISDN B-channels available.
•
The number of ISDN B-channels in use.
•
The high-water mark for the number of ISDN B-channels in use.
•
The value which the number of ISDN B-channels in use must meet or exceed in order to
cause an isdnUsageHigh SNMP trap to be generated by the system.
cause an isdnUsageHigh SNMP trap to be generated by the system.
•
The enabled status for the generation of the ISDN usage traps (isdnUsageHigh and isd-
nUsageNormal).
nUsageNormal).
•
The elapsed time since the monitoring of the high-water mark began.
This information can help you determine if additional lines and/or systems are necessary. For
example, the high water mark could be compared to the number of ISDN B channels available,
taking into consideration the elapsed time.
example, the high water mark could be compared to the number of ISDN B channels available,
taking into consideration the elapsed time.
An example output from this command is as follows:
isdn usage clear
Clears the B-channel high-water mark and elapsed time values. The purpose of this command
is to allow the user to reset the high-water mark to coincide with changes to the system and/
or the network or so that the user can monitor the high-water mark over desired time periods.
is to allow the user to reset the high-water mark to coincide with changes to the system and/
or the network or so that the user can monitor the high-water mark over desired time periods.
[System Name]> isdn usage
number of ISDN B channels available:
6
number of ISDN B channels in use:
3
high water mark:
5
isdnBChanUsage trap threshold:
5
generation of ISDN usage traps:
enabled
elapsed time:
3 days, 4 hrs, 12 min, 38 sec