Intel 10/100 用户手册

42

C H A P T E R

3

set-rsw-file <filename>

Sets the name of the SNMP agent software remote file for download.
This is the file downloaded from a TFTP server, if you’ve defined
one.

Displays the TFTP server IP address to be used for downloading
SNMP agent software.

set-tftp-srvr <IPaddress>

Sets the TFTP server IP address to be used for downloading SNMP
agent software.

Starts the SNMP software download from the defined TFTP server.

Displays the name of the SNMP agent parameter file.

set-par-file <filename>

Sets the name of the SNMP agent parameter file to be downloaded by
BOOTP. The filename must match the name of the parameter file on
the BOOTP server. The format for the parameter file is:

<switch_hardware_address> : <read_comm> : <write_comm>

Example:

00-A0-C9-00-01-23 : public : private

You can find the 

 by using the 

sys-stat

command (it’s the system MAC address).

set-fg-param <dest> <source> <fill_byte> <length>

Sets the frame generator parameters. The 

 and 

 are dash-

separated MAC addresses. The 

 is a single byte used to fill

the entire packet except for the first 12 bytes. The 

 is the total

length of the packet excluding CRC.