IMC Networks AccessEtherLinx/4 用户手册
10
ifstats
Displays Ethernet statistics.
rmstats
Displays RMON statistics.
cleandb
Reboots the AccessEtherLinX/4 with a clean database. This removes all
of the information in the database with an option to change the IP
address of device.
of the information in the database with an option to change the IP
address of device.
download
Opens the Download dialog from which you download firmware from
the server address entered in Server IP Addr in the Main Configuration
screen using TFTP protocol.
the server address entered in Server IP Addr in the Main Configuration
screen using TFTP protocol.
version
Displays the AccessEtherLinX/4 serial number and build date.
vlan
Displays and changes VLAN settings (see Configuring VLANs)
reboot
Reboots the unit
security
Allows ARP request configuration
accounts
Allows addition/deletion of Username/Password accounts.
Administrators must maintain a password list.
Administrators must maintain a password list.
unit
Unit Global Settings
port
Displays port status values and allows some configuration (See Port
Configuration section)
Configuration section)
bw
Bandwidth Limiting Controls
dlsecure*
Downlink ports are isolated from one another (i.e. there is no
communication between downlink ports).
(Configuration is not cleared by the cleandb.)
communication between downlink ports).
(Configuration is not cleared by the cleandb.)
dl_open
*
Downlink ports can communicate with each other.
bpdu
Turns on/off the passing of BPDU packets (Bridge Protocol Data
Units)
Units)
sysdescr
Allows the editing of sysName, sysDescr, and Port information
text.
text.
*Perform a reboot after using the dlsecure and dl_open commands.
Downloading Files
Firmware for the AccessEtherLinX/4 can be downloaded from a central server via
TFTP protocol. Initiate this download via serial configuration or Telnet session. To
download a file, type download and press Enter to be taken to the “Download a file”
screen. This screen displays the IP Address of the TFTP server and the name of the
file to be downloaded. The TFTP server should be open. Make sure the IP Address
and the name of the file are correct in the Current Values section of the Main
Configuration screen. These are changed by entering I from the Main Configuration
screen. Press Enter to start downloading the file.
TFTP protocol. Initiate this download via serial configuration or Telnet session. To
download a file, type download and press Enter to be taken to the “Download a file”
screen. This screen displays the IP Address of the TFTP server and the name of the
file to be downloaded. The TFTP server should be open. Make sure the IP Address
and the name of the file are correct in the Current Values section of the Main
Configuration screen. These are changed by entering I from the Main Configuration
screen. Press Enter to start downloading the file.