IMC Networks AccessEtherLinx/4 用户手册
16
easily upload and store new firmware versions for upgrading multiple devices
with on-board logic installed in, or connected to, an iMediaChassis series.
with on-board logic installed in, or connected to, an iMediaChassis series.
Using Telnet
Assign the AccessEtherLinX/4 an IP Address or use the default IP Address
10.10.10.10, subnet mask 255.0.0.0 before using a Telnet session. All configurations
done via the serial port can also be performed using Telnet. Use only one Telnet
session at a time. Do not use an RS-232 serial session and a Telnet session at the
same time.
10.10.10.10, subnet mask 255.0.0.0 before using a Telnet session. All configurations
done via the serial port can also be performed using Telnet. Use only one Telnet
session at a time. Do not use an RS-232 serial session and a Telnet session at the
same time.
Use Hyper Terminal to access the CLI (Command Line Interface). The manual will
describe how to do this.
describe how to do this.
Configuring the AccessEtherLinX/4 to Act as a Simple Media Converter
with a Switch
Use Hyper Terminal to access the CLI (Command Line Interface). The manual will
describe how to do this.
describe how to do this.