Cabletron Systems 6H129-08 用户手册

Chassis Fan Status (Read-Only)

Displays the current status of the 6C105 fan tray. This field displays either 
“Normal”, “Fault”, or “Not Installed”.

, allows the user to set 

each one of the modules in the chassis (1 through 5), and the ports of the 
corresponding module, as a source or destination port. A port can be set to 
have one or more destination ports and chassis module slot numbers. For 
example, port 1 in module (slot) 1 can be set as a source port with three 
destinations, ports 2, 3, and 4 in module (slot) 3. Traffic from port 1 in 
module 1 is then automatically redirected to ports 2, 3, and 4 in module 3. 
Port 1 in module 1 can also serve as a destination port for other ports and 
modules. The port redirect function is extremely useful for 
troubleshooting purposes, as it allows traffic to be sent to a particular 
port(s) where, with the use of an analyzer or RMON probe, all current 
traffic from the source port(s) can be examined.

The Port Redirect Function screen may not be available 
depending on the operational mode that has been set for the 
chassis. Refer to the Release Notes to see what operational 
modes support the Port Redirect Function. Refer to 

 for instructions on configuring the operational 

modes of all the modules installed in the chassis.

The module number corresponds to the slot number in which 
the module resides in the 6C105 chassis (1 through 5).

Although traffic from the source port (including, if desired, 
errored frames) is sent to the destination port, normal switching 
is still performed for all frames on the source port.