D-Link DGS-1024D 用户手册
23
Power On
To power on the Switch, Plug-in the female connector of the provided
power cord into this socket, and the male side of the cord into a suitable
power source.
power cord into this socket, and the male side of the cord into a suitable
power source.
After the Switch is powered on, the LED indicators will blink briefly
while the system resets.
while the system resets.
Power Failure
As a precaution, in the event of a power failure, unplug the Switch. When
power is resumed, plug the Switch back in.
power is resumed, plug the Switch back in.